giolift ® upper series



Giolift upper seriesGIOLIFT® UPPER SERIES is a Building Maintenance Unit. This is a motorized trolley running along the roof on a concrete path or on rails. Giolift® UPPER SERIES can be used for carrying out works on building façades up to a height of 100 meters.

GIOLIFT® UPPER SERIES has a jib enabling an out reach of 8 meters and can be combined with a permanent suspended motorized platform (PERM 04 or PERM 05) which can hold 2 or 3 persons depending on the type of cradle used.

For optimum safety, the horizontal movement of the GIOLIFT® UPPER SERIES is controlled only from the trolley control panel. The horizontal movements being controlled from the permanent platform in the high position.

    1. Chassis (concrete track or on rails)
    2. Main Mast
    3. Main Jib
    4. Reinforced suspension mast
    5. Rear guide wheels
    6. Reel for power cable supply
    7. Motorized wheel boxes (concrete track or on rails)
    8. Motorized slewing ring
    9. Trolley control panel
    10. Counterweights
    11. Manual rotating spreader bar
    12. Rotating spreader bar brake lever
    13. Limit switches (1)

14. Button box for Raising-Lowering of the cradle
15. Working and safety wire ropes 8.3mm diameter
16. Power supply point on cradle
17. Securistop® fall-prevention system with roller
18. Limit switch (2)
19. Cradle power supply cable
20. Controlled by 2 e-lift®350 hoists
21. Light-weight steel and aluminium construction (PERM 02, PERM 04 and PERM 05)
22. Safety wire rope motorized drum 100 meters capacity
2 3. Working wire rope motorized drum 100 meters capacity
24. Façade pressure wheels
25. Ground travelling wheels
26. Anti-collision bar


TECHNICAL CHARACTERISTICS



  • Overhanging beams up to 8,000 mm
  • Travel by 2 brake motors
  • Travel speed of approx. 8 m/min
  • Communication between cradle and trolley by an electrical hanging cable
  • Motorized Slewing ring
  • Chassis between 1,500 and 2,000 mm
  • Service Load = 120 Kg (1 person) / 240 Kg (2 persons)
  • Power 380 V/400 Hz – Three phases + T / 16 Amp
Our GIOLIFT® range conforms to current Directives (EN-1808). Our function and safety tests as simultaneously preinstalled units have an ISO 9001 quality control.